Laser Marking for Aircraft Cables

Job Work for Laser Marking on Wire/Cables

Print Specification
  • Standard Specification : Up to 96 character per
    identification. Barcode Marking Possible.
  • Character set : Full uppercase and lowercase
    alphanumeric ( A-Z,0-9) plus extra characters.
Wire Size Range:
  • 0.8 mm to 6.35 mm ( 0.031” – 0.25”)
  • OD 26 AWG – 6 AWG nominal.
  • Single core or multi core wire and cable.
Cable Length:
  • Minimum 150 mm (6 in.)
  • Unlimited maximum cable length.
Wire Types

Polymide / Kapton wires, Dispersion coated Teflon ( PTFE), ETFE and FEP or Teflon tape wrapped ( TKT / TK ).Teflon ( PTFE), Tefzel (ETFE, XLETFE) or FEP e.g. BMS 13-48, M22759/32 etc.

Horizontal and vertical mark spacing
  • Between 25mm and 1000mm (1 in 39 in)
Inter Character Spacing
  • Variable in increments of 0.1 mm (0.003 in)
  • Minimum inter character pitch <1 mm ( 0.07 in)
  • Maximum inter character pitch 20 mm (0.19 in)